D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 339

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
show lacp_port
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display LACP port mode settings:
Used to display current LACP port mode settings.
show lacp_port {<portlist>}
This command will display the LACP mode settings as they are
currently configured.
<portlist> - Specifies a port or range of ports to be configured.
If no parameter is specified, the system will display the current LACP
status for all ports.
None.
DES-3800:admin#show lacp_port 1-10
Command: show lacp_port 1-10
Port Activity
------ --------
1 Active
2 Active
3 Active
4 Active
5 Active
6 Active
7 Active
8 Active
9 Active
10 Active
DES-3800:admin#
335