D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 394

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
To configure the last hop router to never enter an SPT:
DES-3800:admin#config last_hop_spt_threshold 0
Command: config last_hop_spt_threshold 0
Success.
DES-3800:admin#
show pim rpset
Purpose
Syntax
Description
Parameters
Restrictions
Usage example:
To view the RP Set information:
DES-3800:admin# show pim rpset
Command: show pim rpset
Bootstrap Router: 12.43.51.81
Group Address
-------------
224.0.0.1/4
Total Entries: 1
DES-3800:admin#
show pim crp
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example:
To view the CRP settings:
DES-3800:admin# show pim crp
Command: show pim crp
PIM Candidate-RP Table
C-RP Holdtime
C-RP Priority
C-RP wildcard prefix count
Used to display the RP Set of the Switch.
show pim rpset
This command will display the information regarding the RP Set learned
by the BSR. This command is for PIM-SM configurations only.
None.
None.
RP Address Holdtime
----------- ---------
31.43.51.81 150
Used to display the Candidate RP settings on the Switch, along with
CRP parameters configured for the Switch.
show pim crp
This command will display the settings for Candidate RPs that are
accessible to the switch. This command is for PIM-SM configurations
only.
None.
Only Administrator or Operator-level users can issue this command.
Expired Time
-------------
107
: 150
: 2
: 0
390
Type
------