D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 172

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
config command_history
Purpose
Syntax
Description
Parameters
Restrictions
Example usage
To configure the command history:
DES-3800:admin#config command_history 20
Command: config command_history 20
Success.
DES-3800:admin#
show command_history
Purpose
Syntax
Description
Parameters
Restrictions
Example usage
To display the command history:
Used to configure the command history.
config command_history <value 1-40>
This command is used to configure the command history.
<value 1-40> − The number of previously executed commands
maintained in the buffer. Up to 40 of the latest executed
commands may be viewed.
Only Administrator-level users can issue this command.
Used to display the command history.
show command_history
This command will display the command history.
None.
None.
DES-3800:admin#show command_history
Command: show command_history
?
? show
show vlan
show command history
DES-3800:admin#
168