D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 423

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
To enable MLD snooping on the switch:
disable mld_snooping
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example:
To disable MLD snooping on the switch:
show mld_snooping
Purpose
Syntax
Description
Parameters
Restrictions
DES-3800:admin#enable mld_snooping
Command: enable mld_snooping
Success.
DES-3800:admin#
Used to disable MLD snooping on the switch.
disable mld_snooping
The disable mld_snooping command disables MLD snooping on the
switch. MLD snooping can be disabled only if IPv6 multicast routing is
not being used. Disabling MLD snooping allows all MLD and IPv6
multicast traffic to flood within a given IPv6 interface.
None.
Only Administrator or Operator-level users can issue this command.
DES-3800:admin#disable mld_snooping
Command: disable mld_snooping
Success.
DES-3800:admin#
Used to show the current status of MLD snooping on the switch.
show mld_snooping {vlan <vlan_name 32> }
The show mld_snooping will display the current MLD snooping
configuration on the switch.
vlan_name - The name of the VLAN for which you want to view the
MLD snooping configuration.
If no parameter specified, the system will display all current MLD
snooping configuration.
None.
419