D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 382

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
config mac_based_access_control_local mac
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To modify a MAC address into this local database which is to be locally authenticated by the Switch, and the VLAN where
it is to be placed after successful authentication:
DES-3800:admin#config mac_based access_control_local mac 00-01-0A-3B-00-06
vlan default
Command: config mac_based access_control_local mac 00-01-0A-3B-00-06 vlan
default
Success.
DES-3800:admin#
delete mac_based_access_control_local mac
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete a MAC address into this local database which is to be locally authenticated by the Switch, and the VLAN where it
is to be placed after successful authentication:
DES-3800:admin#delete mac_based_access_control_local mac 00-01-0A-
3B-00-06
Command: delete mac_based_access_control_local mac 00-01-0A-3B-00-
06
Used to modify a MAC addresses and its corresponding target VLAN
within the local MAC-based access control authentication database.
config mac_based_access_control_local mac <macaddr> vlan
<vlan_name 32>
This command is modify a MAC addresses and its corresponding target
VLAN within the local MAC-based access control authentication
database. Once a queried MAC address is matched in this table, it will
be placed in the VLAN associated with it here. The switch administrator
may enter up to 1024 MAC addresses to be authenticated using the
local method configured here.
mac <macaddr> - Enter the MAC address which is to be authenticated
locally by the Switch, when queried.
<vlan_name 32> - Enter the name of the VLAN where this MAC
address will be placed after a successful authentication.
Only Administrator or Operator-level users can issue this command.
Used to delete a MAC addresses from the local MAC-based access
control authentication database.
delete mac_based access_control_local [mac <macaddr> | vlan
<vlan_name 32>]
This command is delete a MAC addresses from the local MAC-based
access control authentication database. Once a queried MAC address
is matched in this table, it will be placed in the VLAN associated with it
here. The switch administrator may enter up to 1024 MAC addresses to
be authenticated using the local method configured here.
mac <macaddr> - Enter the MAC address which is to be deleted from
the local MAC-based access control authentication database.
<vlan_name 32> - Enter the name of the VLAN which is to be deleted
from the local MAC-Based access control authentication database.
Only Administrator or Operator-level users can issue this command.
378