D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 24

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
save
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To save the Switch's current configuration to non-volatile RAM:
Example usage:
To save the Switch's current configuration to config_id 1 in the non-volatile RAM:
reboot
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To restart the Switch:
Used to save changes in the Switch's configuration to non-volatile
RAM.
save {config <config_id 1-2>}
This command is used to enter the current switch configuration into
non-volatile RAM. The saved switch configuration will be loaded into
the Switch's memory each time the Switch is restarted.
config <config_id 1-2> - Choose this parameter to save the current
switch configuration to a file located on the memory of the Switch.
The user may enter 1 or 2 to identify this configuration file. If no
config_id is specified, changes in the switch configuration will be
saved to the current and active switch configuration file.
Only Administrator or Operator-level users can issue this command.
DES-3800:admin#save
Command: save
Saving all configurations to NV-RAM...
DES-3800:admin#
DES-3800:admin#save config 1
Command: save
Saving all configurations to NV-RAM...
DES-3800:admin#
Used to restart the Switch.
reboot {force_agree}
The reboot command restarts the switch.
force_agree - When force_agree is specified, the reboot command
will be executed immediatedly without further confirmation.
Only Administrator-level users can issue this command.
DES-3800:admin#reboot
Command: reboot
Are you sure
reboot?(y/n)
Please wait, the switch is rebooting...
to proceed with
20
Done.
Done.
the system