D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 197

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
show igmp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display IGMP configurations:
DES-3800:admin#show igmp
Command: show igmp
IGMP Interface Configurations
QI : Query Interval
RV : Robustness Value
Interface
--------
System
p1
Total Entries: 2
DES-3800:admin#
Used to display the IGMP configuration for the Switch of for a specified
IP interface.
show igmp {ipif <ipif_name 12>}
This command will display the IGMP configuration for the Switch if no IP
interface name is specified. If an IP interface name is specified, the
command will display the IGMP configuration for that IP interface.
<ipif_name 12> − The name of the IP interface for which the IGMP
configuration will be displayed.
None.
IP Address/Netmask
------------------
10.90.90.90/8
20.1.1.1/8
MRT : Maximum Response Time
LMQI : Last Member Query Interval
Version QI MRT
------- ---- ---
1 125 10
1 125 10
193
RV LMQI State
--- ---- --------
2 1 Enabled
2 1 Enabled