Snmp V3 - D-Link DES-3852 - xStack Switch - Stackable Cli Manual

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
The SNMP v3 commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following
table.
Command
create snmp user
delete snmp user
show snmp user
show snmp groups
create snmp view
delete snmp view
show snmp view
create snmp
community
delete snmp
community
show snmp
community
config snmp
engineID
show snmp
engineID
create snmp group
delete snmp group
create snmp host
delete snmp host
show snmp host
show snmp traps
Parameters
<snmp_username 32> <groupname 32> {encrypted
[by_password auth [md5 <auth_password 8-16 > | sha
<auth_password 8-20 >]
priv [none(1) | des <priv_password 8-16> ]|
by_key auth [md5 <auth_key 32-32>| sha <auth_key 40-40>]
priv [none(1) | des) <priv_key 32-32> ]]}
<snmp_username 32>
<view_name 32> <oid> view_type [included | excluded]
<view_name 32> [all | <oid>]
<view_name 32>
<community_string 32> view <view_name 32> [read_only|read_write]
<community_string 32>
<community_string 32>
<snmp_engineID>
<groupname 32> [v1 | v2c | v3 [noauth_nopriv | auth_nopriv |
auth_priv]]{read_view <view_name 32> | write_view <view_name 32>
| notify_view <view_name 32>}
<groupname 32>
<ipaddr> [v1 | v2c | v3 [noauth_nopriv | auth_nopriv | auth_priv]]
<auth_string 32>
<ipaddr>
<ipaddr>
31
6

SNMP V3