D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 114

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
config vlan vlanid
Restrictions
Example usage:
To add ports 4 through to 8 as tagged ports to VLAN ID 2 and VLAN ID 3:
DES-3800:admin#config vlan vlanid 2-3 add tagged 4-8
Command: config vlan vlanid 2-3 add tagged 4-8
Success.
DES-3800:admin#
Example usage:
To enable the VLAN ID 2 and VLAN ID 3 advertisment:
DES-3800:admin#config vlan vlanid 2-3 advertisement
enable
Command: config vlan vlanid 2-3 advertisement enable
Success.
DES-3800:admin#
Example usage:
To modify the name of VLAN ID 2:
DES-3800:admin#config vlan vlanid 2 name vlan_2
Command: config vlan vlanid 2 name vlan_2
Success.
DES-3800:admin#
delete vlan vlanid
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To remove VLAN ID 2 and VLAN ID 3:
port should join GVRP or not. There are two parameters:
enable- Specifies that the port should join GVRP.
disable- Specifies that the port should not join GVRP.
name- Entering the name parameter specifies the name of the VLAN
to be modified.
<name>- Enter a name for the VLAN
Only Administrator or Operator-level users can issue this command.
Used to delete a previously configured VLAN on the Switch.
delete vlan vlanid <vidlist>
The delete vlan by vlan id list command deletes previously configured
VLANs on the Switchh.
<vidlist> − Specifies a range of VLAN ID to be deleted.
Only Administrator or Operator-level users can issue this command.
110