D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 85

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
config system_severity
Restrictions
Example usage:
To configure the system severity settings for critical traps only:
DES-3800:admin#config system_severity trap critical
Command: config system_severity trap critical
Success.
DES-3800:admin#
show system_severity
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the system severity settings currently implemented on the Switch:
•
all – Entering this parameter will define which events occurring on
the Switch will be sent to a SNMP agent and the Switch's log for
analysis.
Choose one of the following to identify what level of severity warnings are
to be sent to the destination entered above.
•
critical – Entering this parameter along with the proper
destination, stated above, will instruct the Switch to send only
critical events to the Switch's log or SNMP agent.
•
warning – Entering this parameter along with the proper
destination, stated above, will instruct the Switch to send critical
and warning events to the Switch's log or SNMP agent.
•
information – Entering this parameter along with the proper
destination, stated above, will instruct the switch to send
informational, warning and critical events to the Switch's log or
SNMP agent.
Only Administrator or Operator-level users can issue this command.
To display the current severity settings set on the Switch.
show system_severity
This command is used to view the severity settings that have been
implemented on the Switch using the config system_severity
command.
None.
Only Administrator or Operator-level users can issue this command.
DES-3800:admin#show system_severity
Command: show system_severity
system_severity log
system_severity trap
DES-3800:admin#
: information
: critical
81