D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 227

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
show ospf ipif
Syntax
Description
Parameters
Restrictions
Usage Example:
To display the current OSPF interface settings, for a specific OSPF interface:
DES-3800:admin#show ospf ipif ipif2
Command: show ospf ipif ipif2
Interface Name:
((Link Up)
Network Medium Type: BROADCAST
Area ID:
Priority:
DR Address:
Hello Interval:
Transmit Delay:
Authentication:
Total Entries: 1
DES-3800:admin#
show ospf all
Purpose
Syntax
Description
Parameters
Restrictions
Usage example:
To display the current OSPF interface settings, for all OSPF interfaces on the Switch:
DES-3800:admin#show ospf all
Command: show ospf all
Interface Name: System
Network Medium Type: BROADCAST
Area ID:
Priority:
DR Address:
Hello Interval:
Transmit Delay:
Authentication:
Interface Name:
Network Medium Type: BROADCAST
show ospf ipif {<ipif_name 12>}
This command will display the current OSPF interface settings for the
specified interface name.
<ipif_name 12> − The IP interface name for which to display the current
OSPF interface settings.
None.
ipif2
1.0.0.0
1
123.234.12.34
10
1
None
Used to display the current OSPF settings of all the OSPF interfaces on
the Switch.
show ospf all
This command will display the current OSPF settings for all OSPF
interfaces on the Switch.
None.
Only Administrator or Operator-level users can issue this command.
0.0.0.0
1
10.42.73.10
10
1
None
ipif2
IP Address: 123.234.12.34/24
Metric: 1
Administrative State:
DR State: DR
Backup DR Address:
Dead Interval:
Retransmit Time:
IP Address: 10.42.73.10/8 (Link Up)
Metric: 1
Administrative State:
DR State: DR
Backup DR Address:
Dead Interval: 40
Retransmit Time:
IP Address: 123.234.12.34/24 (Link Up)
Metric: 1
223
Enabled
None
40
5
Enabled
None
5