D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 211

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
show ipmc
Purpose
Syntax
Description
Parameters
Restrictions
Usage example
To display the current IP multicast interface table by DVMRP entry:
DES-3800:admin#show ipmc protocol dvmrp
Command: show ipmc protocol dvmrp
Interface Name
---------
System
Total Entries: 1
DES-3800:admin#
show ipfdb
Purpose
Syntax
Description
Parameters
Restrictions
Used to display the IP multicast interface table.
show ipmc {ipif <ipif_name 12> | protocol [dvmrp | pim]}
This command will display the current IP multicast interface table.
<ipif_name 12> − The name of the IP interface for which to display the IP
multicast interface table for.
protocol − Allows the user to specify whether or not to use one of the
available protocols to display the IP multicast interface table. For
example, if DVMRP is specified, the table will display only those entries
that are related to the DVMRP protocol.
•
dvmrp – Specifying this parameter will display only those
entries that are related to the DVMRP protocol.
•
pim - Specifying this parameter will display only those entries
that are related to the PIM protocol.
None.
IP Address
-----------
10.90.90.90
Used to display the current network address forwarding database.
show ipfdb {[ip_address <ipaddr> | interface <ipif_name 12> |
port <port>]}
The show ipfdb command displays the current network address
forwarding database.
ip_address <ipaddr> -Displays the specified IP address.
interface <ipif_name 12 > - Displays the ipfdb in the specified
interface.
port <port> - Displays the ipfdb by the specified port number.
None.
Multicast Routing
--------------
DVMRP
207