D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 91

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
show multicast_fdb
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display multicast MAC address table:
show fdb
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display unicast MAC address table:
DES-3800:admin#show fdb
Command: show fdb
Unicast MAC Address Aging Time = 300
Used to display the contents of the Switch's multicast forwarding
database.
show mulitcast_fdb
<macaddr>]
This command is used to display the current contents of the Switch's
multicast MAC address forwarding database.
<vlan_name 32> − The name of the VLAN on which the MAC address
resides.
<macaddr> − The MAC address that is present in the forwarding
database table.
None.
DES-3800:admin#show multicast_fdb vlan default
Command: show multicast_fdb vlan default
VLAN Name : default
MAC Address : 01-00-5E-00-00-00
Egress Ports : 1-5
Mode : Static
Total Entries : 1
DES-3800:admin#
Used to display the current unicast MAC address forwarding
database.
show fdb {port <port> | vlan <vlan_name 32> | mac_address
<macaddr> | static | aging_time}
This command will display the current contents of the Switch's
forwarding database.
port <port> − The port number corresponding to the MAC destination
address. The Switch will always forward traffic to the specified device
through this port.
<vlan_name 32> − The name of the VLAN on which the MAC address
resides.
<macaddr> − The MAC address that is present in the forwarding
database table.
static − Displays the static MAC address entries.
aging_time − Displays the aging time for the MAC address forwarding
database.
None.
[vlan <vlan_name
87
32> | mac_address