D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 202

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
Example usage:
To delete an entry domain name dns1, IP address 10.43.21.12 from DNS static table.
DES-3800:admin#config dnsr delete static dns1 10.43.21.12
Command: config dnsr delete static dns1 10.43.21.12
Success.
DES-3800:admin#
enable dnsr
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable status of DNS relay:
DES-3800:admin#enable dnsr
Command: enable dnsr
Success.
DES-3800:admin#
Example usage:
To enable cache lookup for DNS relay.
DES-3800:admin#enable dnsr cache
Command: enable dnsr cache
Success.
DES-3800:admin#
Example usage:
To enable static table lookup for DNS relay.
DES-3800:admin#enable dnsr static
Command: enable dnsr static
Success.
DES-3800:admin#
Used to enable DNS relay.
enable dnsr {cache | static}
This command is used, in combination with the disable dnsr
command below, to enable and disable DNS Relay on the Switch.
cache - This parameter will allow the user to enable the cache
lookup for the DNS rely on the Switch.
static - This parameter will allow the user to enable the static table
lookup for the DNS rely on the Switch.
Only Administrator or Operator-level users can issue this
command.
198