D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 304

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
config ssl cachetimeout timeout
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To set the SSL cachetimeout for 7200 seconds:
DES-3800:admin#config ssl cachetimeout timeout 7200
Command: config ssl cachetimeout timeout 7200
Success.
DES-3800:admin#
show ssl cachetimeout
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the SSL cache timeout on the Switch:
show ssl
Purpose
Syntax
Description
Used to configure the SSL cache timeout.
config ssl cachetimeout timeout <value 60-86400>
This command will set the time between a new key exchange between a
client and a host using the SSL function. A new SSL session is established
every time the client and host go through a key exchange. Specifying a
longer timeout will allow the SSL session to reuse the master key on future
connections with that particular host, therefore speeding up the negotiation
process.
timeout <value 60-86400> - Enter a timeout value between 60 and 86400
seconds to specify the total time an SSL key exchange ID stays valid before
the SSL module will require a new, full SSL negotiation for connection. The
default cache timeout is 600 seconds
None.
Used to show the SSL cache timeout.
show ssl cachetimeout
Entering this command will allow the user to view the SSL cache
timeout currently implemented on the Switch.
None.
None.
DES-3800:admin#show ssl cachetimeout
Command: show ssl cachetimeout
Cache timeout is 600 second(s).
DES-3800:admin#
Used to view the SSL status and the certificate file status on the
Switch.
show ssl
This command is used to view the SSL status on the Switch.
300