D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 204

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
show dnsr
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display DNS relay status:
DES-3800:admin#show dnsr
Command: show dnsr
DNSR Status
Primary Name Server
Secondary Name Server
DNSR Cache Status
DNSR Static Cache Table Status : Disabled
DNS Relay Static Table
Domain Name
-----------------------------------------
www.123.com.tw
bbs.ntu.edu.tw
Total Entries: 2
DES-3800:admin#
Used to display the current DNS relay status.
show dnsr {static}
This command is used to display the current DNS relay status.
static − Allows the display of only the static entries into the DNS relay
table. If this parameter is omitted, the entire DNS relay table will be
displayed.
None.
: Disabled
: 0.0.0.0
: 0.0.0.0
: Disabled
IP Address
----------------
10.12.12.123
140.112.1.23
200