D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 43

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
create snmp community
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create an SNMP community string:
DES-3800:admin#create snmp community dlink view CommunityView
read_write
Command: create snmp community dlink view CommunityView read_write
Success.
DES-3800:admin#
delete snmp community
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete an SNMP community:
DES-3800:admin#delete snmp community dlink
Use an SNMP community string to define the relationship between
the SNMP manager and the agent. The community string acts like a
password to permit access to the agent on the switch. You can
specify one or more of the following characteristics associated with
the string:
An access list of IP addresses of the SNMP managers that are
permitted to use the community string to gain access to the agent.
A MIB view, which defines the subset of all MIB objects accessible to
the given community.
Read and write or read-only permission for the MIB objects
accessible to the community.
create snmp community <community_string 32> view
<view_name 32> [read_only|read_write]
The create snmp community command creates an SNMP community
string.
community_string- Communtiy string. Max string length is 32.
view_name- View name. A MIB view. Max length is 32
[read_only | read_write]- Read and write or read-only permission.
Only Administrator or Operator-level users can issue this command.
Used to remove a specific communtiy string
delete snmp community <community_string 32>
The delete snmp community command removes a specific
community string.
<community_string 32>- Type the Communtiy string that will be
deleted.
Only Administrator or Operator-level users can issue this command.
39