D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 430

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
Example usage:
To enable the loopdetect:
disable loopdetect
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the loopdetect:
show loopdetect
Purpose
Syntax
Description
Parameters
Restrictions
DES-3800:admin#enable loopdetect
Command: enable loopdetect
Success.
DES-3800:admin#
Used to globally disable loopdetect function on the switch.
disable loopdetect
The disable loopdetect command allows the Loop Detection
Function to be globally disabled on the switch. The default value is
disabled.
None.
Only Administrator or Operator-level users can issue this command.
DES-3800:admin#disable loopdetect
Command: disable loopdetect
Success.
DES-3800:admin#
Used to display the switch's current loopdetect configuration.
show loopdetect
The show loopdetect command displays the switch's current
loopdetect configuration.
None.
None.
426