D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 21

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
disable clipaging
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable pausing of the screen display when the show command output reaches the end of the page:
enable telnet
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable Telnet and configure port number:
DES-3800:admin#
Used to disable the feature that pauses the scrolling of the console
screen when the show command displays more than one page.
disable clipaging
This command is used to disable the pausing of the console screen
at the end of each page when a command displays more than one
screen of information.
None.
Only Administrator or Operator-level users can issue this command.
DES-3800:admin#disable clipaging
Command: disable clipaging
Success.
DES-3800:admin#
This feature enables the Switch to be managed via TELNET based
management software and also allows you to specify the port
number that will be used to manage the Switch via TELNET.
enable telnet <tcp_port_number 1-65535>
This command is used to enable the Telnet protocol on the Switch.
The user can specify the TCP or UDP port number the Switch will
use to listen for Telnet requests.
<tcp_port_number 1-65535> − The TCP port number. TCP ports
are numbered between 1 and 65535. The "well-known" TCP port for
the Telnet protocol is 23.
Only Administrator or Operator-level users can issue this command.
DES-3800:admin#enable telnet 23
Command: enable telnet 23
Success.
DES-3800:admin#
17