D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 371

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
To config port 1,3 to set the multicast address profile 2.
show limited_multicast_addr
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example:
To show limited multicast address range:
config max_mcast_group
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example:
DES-3800:admin# config limited_multicast_addr ports
1,3 add profile_id 2
Command: config limited_multicast_addr ports 1,3 add
profile_id 2
Success.
DES-3800:admin#
Used to show per-port Limited IP multicast address range.
show limited_multicast_addr { ports <portlist>}
The show limited_multicast_addr command allows you to show
multicat address range by ports.
<portlist> - A range of ports to show the limited multicast address
configuration.
None.
DES-3800:admin#show limited_multicast_addr 1,3
Command: show limited_multicast_addr 1,3
Port : 1
Access : Deny
Profile Id: 1
Port : 3
Access : Deny
Profile ID: 1
DES-3800:admin#
This command configures the maximum number of multicast group
that a port can join.
config max_mcast_group ports <portlist> max_group <value 1-
256>
This command configures the maximum number of multicast group
that a port can join.
<portlist> - A range of ports to config the max_mcast_group
max_group - Specifies the maximum number of the multicast groups.
The range is from 1 to 256.
Only Administrator or Operator-level users can issue this command.
367