D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 184

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
DES-3800:admin#show iproute
Command: show iproute
Routing Table
IP Address/Netmask
------------------
10.0.0.0/8
Total Entries : 1
DES-3800:admin#
config iproute ospf ecmp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To config the iproute ospf ecmp command:
DES-3800:admin#config iproute ospf ecmp enable
Command: config iproute ospf ecmp enable
Success.
DES-3800:admin#
Gateway
---------- ----------- ----- --------
0.0.0.0
Used to control the OSPF ECMP function.
config iproute ospf ecmp
This command is used to enable or disable the ECMP function.
enable- Enables ECMP
disable- Disables ECMP
Only Administrator or Operator-level users can issue this command.
Interface Hops
System 1
180
Protocol
Local