D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 37

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
delete snmp user
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete a user from an SNMP group:
DES-3800:admin# delete snmp user dlink
Command: delete snmp user dlink
Success.
DES-3800:admin#
show snmp user
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display an snmp user:
DES-3800:admin#show snmp user
Command: show snmp user
Username
initial
Total Entries : 1
DES-3800:admin#
Used to remove a user from an SNMP group and delete the
associated group in SNMP
delete snmp user < snmp_username 32>
The delete snmp user command removes a user from a SNMP
group and deletes the associated group in SNMP group..
<snmp_username 32>
Only Administrator or Operator-level users can issue this command.
Used to display information on every SNMP username in the group
username table.
show snmp user
The show snmp user command displays information on every
SNMP username in the group username table.
None.
None.
Group Name SNMP Version
initial V3
Auth-Protocol
None
33
PrivProtocol
None