D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 286

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
config sim
Restrictions
To change the time interval of the discovery protocol:
DES-3800:admin# config sim commander
dp_interval 40
Command: config sim commander dp_interval 40
Success.
DES-3800:admin#
To change the hold time of the discovery protocol:
DES-3800:admin# config sim hold_time 120
Command: config sim hold_time 120
Success.
DES-3800:admin#
To transfer the CS (commander) to be a CaS (candidate):
DES-3800:admin# config sim candidate
Command: config sim candidate
Success.
DES-3800:admin#
To transfer the Switch to be a CS:
DES-3800:admin# config sim commander
Command: config sim commander
Success.
DES-3800:admin#
To update the name of a group:
DES-3800:admin# config sim commander group_name Trinity
Command: config sim commander group_name Trinity
Success.
DES-3800:admin#
set the time, in seconds, the Switch will hold information
sent to it from other switches, utilizing the discovery interval
protocol. The user may set the hold time from 100 to 255
seconds.
Only Administrator-level users can issue this command.
282