D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 16

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
The following table summarizes the Admin, Operator and User privileges:
Management
Configuration
Network Monitoring
Community Strings and Trap Stations
Update Firmware and Configuration Files
System Utilities
Factory Reset
User Account Management
Add/Update/Delete User Accounts
View User Accounts
config account
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the user password of "dlink" account:
NOTE: One admin-level account must be created before other user accounts can be set.
When a user logs in to the Switch, the default command prompt will display the level of
privilege assigned. (DES-3800:admin#, DES-3800:oper#, DES-3800:user#). For more
information regarding user accounts, see the DES-3800 Series Layer 3 Stackable Fast
Ethernet Managed Switch User Manual.
Used to configure user accounts.
config account <username>
The config account command configures a user account that has
been created using the create account command.
<username > - Name of the account. The account must already be
defined.
Only Administrator-level users can issue this command.
DES-3800:admin#config account dlink
Command: config account dlink
Enter a old password:****
Enter a case-sensitive new password:****
Enter the new password again for confirmation:****
Success.
DES-3800:admin#
Admin
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
12
Operator User
Yes Read-only
Yes Read-only
Yes Read-only
No No
Yes No
No No
No No
No No