D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 381

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
delete mac_based_access_control guest_vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete a MAC-based Access Control Guest VLAN.
DES-3800:admin#delete mac_based_access_control guest_vlan
Command: delete mac_based_access_control guest_vlan
Success.
DES-3800:admin#
create mac_based_access_control_local mac
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enter a MAC address into this local database which is to be locally authenticated by the Switch, and the VLAN where it
is to be placed after successful authentication:
DES-3800:admin#create mac_based_access_control_local mac 00-01-0A-3B-00-06
vlan Triton
Command: create mac_based_access_control_local mac 00-01-0A-3B-00-06 vlan
Triton
Success.
DES-3800:admin#
Used to delete a MAC-based access control Guest VLAN.
delete mac_based_access_control guest_vlan
This command is used to delete a MAC-Based Access Control Guest
VLAN.
None.
Only Administrator or Operator-level users can issue this command.
Used to set a list of MAC addresses, along with their corresponding
target VLAN, which will be authenticated for the Switch
create mac_based_access_control_local mac <macaddr> vlan
<vlan_name 32>
This command is used to set a list of MAC addresses, along with their
corresponding target VLAN, which will be authenticated for the Switch.
Once a queried MAC address is matched in this table, it will be placed
in the VLAN associated with it here. The switch administrator may enter
up to 1024 MAC addresses to be authenticated using the local method
configured here.
mac <macaddr> - Enter the MAC address which is to be authenticated
locally by the Switch, when queried.
<vlan_name 32> - Enter the name of the VLAN where this MAC
address will be placed after a successful authentication.
Only Administrator or Operator-level users can issue this command.
377