D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 342

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
create cpu access_profile
•
protocol_id − Specifies that the switch will examine each frame's Protocol ID field.
•
•
mask options behind the IP header.
packet_content_mask – Specifies that the Switch will mask the packet header beginning with the
•
offset value specified as follows:
•
•
•
•
•
profile_id <value 1-5> − Specifies an index number that will identify the access profile being created with
this command.
Only Administrator or Operator-level users can issue this command.
Restrictions
Example usage:
To create a CPU access profile:
DES-3800:admin#create access_profile ip vlan
source_ip_mask 20.0.0.0 destination_ip_mask 10.0.0.0 dscp
icmp type code permit profile_id 1
Command: create access_profile ip vlan source_ip_mask
20.0.0.0 destination_ip_mask 10.0.0.0 dscp icmp type code
permit profile_id 1
Success.
DES-3800:admin#
delete cpu access_profile
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the CPU access profile with a profile ID of 1:
dst_port_mask <hex 0x0-0xffff> − Specifies a UDP port mask for the destination port.
user_define_mask <hex 0x0-0xffffffff> − Specifies that the rule applies to the IP protocol ID and the
offset_0-15 - Enter a value in hex form to mask the packet from byte 0 to byte 15.
offset_16-31 - Enter a value in hex form to mask the packet from byte 16 to byte 31.
offset_32-47 - Enter a value in hex form to mask the packet from byte 32 to byte 47.
offset_48-63 - Enter a value in hex form to mask the packet from byte 48 to byte 63.
offset_64-79 - Enter a value in hex form to mask the packet from byte 64 to byte 79.
Used to delete a previously created access profile or cpu access profile.
delete cpu access_profile profile_id <value 1-5>
The delete cpu access_profile command is used to delete a previously
created CPU access profile.
profile_id <value 1-5> − Enter an integer between 1 and 5 that is used to
identify the CPU access profile to be deleted with this command. This value is
assigned to the access profile when it is created with the create cpu
access_profile command.
Only Administrator or Operator-level users can issue this command.
DES-3800:admin#delete cpu access_profile profile_id 1
Command: delete cpu access_profile profile_id 1
Success.
DES-3800:admin#
338