D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 176

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
disable ipif
Restrictions
Example usage:
To disable the IP interface named "s2":
delete ipif
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the IP interface named s2:
interface named "s2":
show ipif
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display IP interface settings.
DES-3800:admin#show ipif System
Command: show ipif System
all – Entering this parameter will disable all the IP interfaces currently
configured on the Switch.
Only Administrator or Operator-level users can issue this command.
DES-3800:admin#disable ipif s2
Command: disable ipif s2
Success.
DES-3800:admin#
Used to delete the configuration of an IP interface on the Switch.
delete ipif {<ipif_name 12> | all}
This command will delete the configuration of an IP interface on the
Switch.
<ipif_name 12> − The name of the IP interface to delete.
all – Entering this parameter will delete all the IP interfaces currently
configured on the Switch.
Only Administrator or Operator-level users can issue this command.
DES-3800:admin# delete ipif s2
Command: delete ipif s2
Success.
DES-3800:admin#
Used to display the configuration of an IP interface on the Switch.
show ipif {<ipif_name 12>}
This command will display the configuration of an IP interface on the
Switch.
<ipif_name 12> − The name created for the IP interface to be viewed.
None.
172