D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 265

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
Example usage:
To configure the user defined method list "Permit" with authentication methods TACACS, XTACACS and local, in that
order.
DES-3800:admin#config authen_enable method_list_name Trinity method
tacacs xtacacs local
Command: config authen_enable method_list_name Trinity method tacacs
xtacacs local
Success.
DES-3800:admin#
Example usage:
To configure the default method list with authentication methods XTACACS, TACACS+ and local, in that order:
DES-3800:admin#config authen_enable default method xtacacs
tacacs+ local
Command: config authen_enable default method xtacacs tacacs+
local
Success.
DES-3800:admin#
delete authen_enable method_list_name
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the user-defined method list "Permit"
DES-3800:admin#delete authen_enable method_list_name
Permit
Command: delete authen_enable method_list_name Permit
Success.
DES-3800:admin#
Used to delete a user-defined method list of authentication methods
for promoting normal user level privileges to Administrator level
privileges on the Switch.
delete authen_enable method_list_name <string 15>
This command is used to delete a user-defined method list of
authentication methods for promoting user level privileges to
Administrator level privileges.
<string 15> - Enter an alphanumeric string of up to 15 characters to
define the given enable method list to delete.
Only Administrator-level users can issue this command.
261