D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 250

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
config ssh user
Restrictions
Example usage:
To configure the SSH user:
show ssh user
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the SSH user:
user.
password – This parameter should be chosen if the user wishes to
use an administrator defined password for authentication.
publickey – This parameter should be chosen to use the publickey
on a SSH server for authentication.
Only Administrator or Operator-level users can issue this command.
DES-3800:admin# config ssh user Trinity authmode
Password
Command: config ssh user Trinity authmode Password
Success.
DES-3800:admin#
Used to display the SSH user setting.
show ssh user
This command allows you to display the current SSH user setting.
None.
Only Administrator-level users can issue this command.
DES-3800:admin#show ssh user
Command: show ssh user
Current Accounts:
UserName
------------------
Trinity
DES-3800:admin#
Note: To configure the SSH user, the administrator must create a user
account on the Switch. For information concerning configuring a user
account, please see the section of this manual entitled Basic Switch
Commands and then the command, create user account.
Authentication
---------------------
Publickey
246