D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 416

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
clear dhcp binding
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example:
To clear a dynamic binding entries in pool "Engineering".
show dhcp binding
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example:
To show dynamic binding entries:
DES-3800:admin#show dhcp binding engineering
Command: show dhcp binding engineering
Pool Name
---------
engineering 192.168.0.1 00-80-C8-08-13-88
engineering 192.168.0.2 00-80-C8-08-13-99
Total Entries : 2
DES-3800:admin#
This command will delete a binding entry or all binding entries in a
pool or clear all binding entries in all pools.
clear dhcp binding [<pool_name 12> [<ipaddr> | all] | all]
This command clears a binding entry or all binding entries in a pool or
clears all binding entries in all pools. Note that this command will not
clear the dynamic binding entry which matches a manual binding
entry.
<pool_name 12> - Pool's name.
<ipaddr> - IP address which will be cleared.
Only Administrator or Operator-level users can issue this command.
DES-3800:admin#clear dhcp binding Engineering
10.20.3.4
Command: clear dhcp binding Engineering 10.20.3.4
Success.
DES-3800:admin#
Display the current binding entry information.
show dhcp binding {<pool_name 12>}
This command displays the current binding entry information in a pool
or all pools.
<pool_name 12> - Pool's name.
None.
IP Address Hardware address
---------- ----------------
Type Status
---- ------
Ethernet Manual
Ethernet Automatic 38600
412
Lifetime
--------
86400