D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 412

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
Usage Example:
To configure default router:
config dhcp pool lease
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example:
To config lease of a pool:
config dhcp pool boot_file
Purpose
Syntax
Description
Parameters
Restrictions
DES-3800:admin#config dhcp pool default_router
engineering 10.10.10.1
Command: config dhcp pool default_router engineering
10.10.10.1
Success.
DES-3800:admin#
Specifies the duration of the lease.
config dhcp pool lease <pool_name 12> [<day 0-365> <hour 0-
23><minute 0-59> | infinite]
By default, each IP address assigned by a DHCP server comes with a
one-day lease, which is the amount of time that the address is valid.
<pool_name 12> - Pool's name.
<day 0-365> - Days of lease.
<hour 0-23> - Hours of lease.
<minute 0-59> - Minutes of lease
Infinite - Means infinite lease.
Only Administrator or Operator-level users can issue this command.
DES-3800:admin#config dhcp pool lease engineering
infinite
Command: config dhcp pool lease engineering infinite
Success.
DES-3800:admin#
Specifies the name of the file that is used as a boot image.
config dhcp pool boot_file <pool_name 12> {<file_name 64>}
The boot file is used to store the boot image for the client. The boot
image is generally the operating system the client uses to load.
<pool_name 12> - Pool's name.
< file_name 64> - File name of boot image.
Only Administrator or Operator-level users can issue this command.
408