D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 221

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
delete ospf host_route
Parameters
Restrictions
Usage example:
To delete an OSPF host route:
DES-3800:admin#delete ospf host_route 10.48.74.122
Command: delete ospf host_route 10.48.74.122
Success.
DES-3800:admin#
config ospf host_route
Purpose
Syntax
Description
Parameters
Restrictions
Usage example:
To configure an OSPF host route:
DES-3800:admin#config ospf host_route 10.48.74.122 area
10.1.1.1 metric 2
Command: config ospf host_route 10.48.74.122 area 10.1.1.1
metric 2
Success.
DES-3800:admin#
show ospf host_route
Purpose
Syntax
Description
Parameters
Restrictions
Usage example:
To display the current OSPF host route table:
<ipaddr> − The IP address of the OSPF host.
Only Administrator or Operator-level users can issue this command.
Used to configure OSPF host route settings.
config ospf host_route <ipaddr> {area <area_id> | metric <value>}
This command is used to configure an OSPF host route settings.
<ipaddr> − The IP address of the host.
<area_id> − A 32-bit number in the form of an IP address
(xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the OSPF
domain.
<value> − A metric between 1 and 65535 that will be advertised for the
route.
Only Administrator or Operator-level users can issue this command.
Used to display the current OSPF host route table.
show ospf host_route {<ipaddr>}
This command will display the current OSPF host route table.
<ipaddr> − The IP address of the host.
None.
DES-3800:admin#show ospf host_route
Command: show ospf host_route
217