D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 136

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
enable 802.1x
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable 802.1x switch wide:
disable 802.1x
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable 802.1x on the Switch:
Used to enable the 802.1x server on the Switch.
enable 802.1x
The enable 802.1x command enables the 802.1x Network Access control
server application on the Switch. To select between port-based or MAC-
based, use the config 802.1x auth_mode command.
None.
Only Administrator or Operator-level users can issue this command.
DES-3800:admin#enable 802.1x
Command: enable 802.1x
Success.
DES-3800:admin#
Used to disable the 802.1x server on the Switch.
disable 802.1x
The disable 802.1x command is used to disable the 802.1x Network
Access control server application on the Switch. To select between port-
based or MAC-based, use the config 802.1x auth_mode command.
None.
Only Administrator or Operator-level users can issue this command.
DES-3800:admin#disable 802.1x
Command: disable 802.1x
Success.
DES-3800:admin#
132