D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 345

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
Example usage:
To configure CPU access list entry:
DES-3800:admin#config cpu access_profile profile_id 5 add access_id 1
ip vlan default source_ip 20.2.2.3 destination_ip 10.1.1.252 dscp 3
icmp type 11 code 32 port 1 deny
Command: config cpu access_profile profile_id 10 add access_id 1 ip
vlan default source_ip 20.2.2.3 destination_ip 10.1.1.252 dscp 3 icmp
type 11 code 32 port 1 deny
Success.
DES-3800:admin#
enable cpu_interface_filtering
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To enable CPU interface filtering:
disable cpu_interface_filtering
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To disable CPU filtering:
DES-3800:admin#disable cpu_interface_filtering
Command: disable cpu_interface_filtering
Success.
DES-3800:admin#
Used to enable CPU interface filtering on the Switch.
enable cpu_interface_filtering
This command is used, in conjunction with the disable
cpu_interface_filtering command below, to enable and disable CPU
interface filtering on the Switch.
None.
Only Administrator or Operator-level users can issue this command.
DES-3800:admin#enable cpu_interface_filtering
Command: enable cpu_interface_filtering
Success.
DES-3800:admin#
Used to disable CPU interface filtering on the Switch.
disable cpu_interface_filtering
This command is used, in conjunction with the enable
cpu_interface_filtering command above, to enable and disable CPU
interface filtering on the Switch.
None.
Only Administrator or Operator-level users can issue this command.
341