D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 365

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
create double_vlan
Used to create a Double VLAN on the Switch.
Purpose
Syntax create double_vlan <vlan_name 32> spvid <vlanid 1-4094> {tpid
<hex 0x0-0xffff>}
This command is used to create a Double VLAN (service provider
Description
VLAN) on the Switch.
vlan <vlan_name 32> - The name of the Double VLAN to be created.
Parameters
The user is to enter an alphanumeric string of up to 32 characters to
identify this VLAN.
spvid <vlanid 1-4094> - The VLAN ID of the service provider VLAN.
The user is to identify this VLAN with a number between 1 and 4094.
tpid <hex 0x0-0xffff>- The tag protocol ID. This ID, identified here in
hex form, will help identify packets to devices as Double VLAN
tagged packets. The default setting is 0x8100.
Only Administrator or Operator-level users can issue this command.
Restrictions
Users must have the Switch enabled for Double VLANs.
DES-3800:admin#create double_vlan Trinity spvid 6 tpid
0x9100
Command: create double_vlan Trinity spvid 6 tpid 0x9100
Success.
DES-3800:admin#
361