D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 361

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
show wac user
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the parameters for the WAC user:
DES-3800:admin#show wac user
Command: show wac user
Current Accounts:
Username
---------------
Darren
Total Entries : 1
DES-3800:admin#
show wac
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the WAC parameters
Used to display the parameters for a previously created Web-based
Access Control user on the Switch.
show wac user
This command is used to display the parameters for a previously
created Web-based Access Control user on the Switch.
None.
Only Administrator-level users can issue this command.
VLAN name
----------------
Trinity
Used to display the parameters for the Web-based Access Control
settings currently configured on the Switch.
show wac {ports [<portlist> | all]}
This command is used to display the parameters for the Web-based
Access Control settings currently configured on the Switch.
ports <portlist> - Use this parameter to define ports to be viewed for
their Web-based Access Control settings.
all – Use this parameter to display all ports for their Web-based Access
Control settings.
Entering no parameters will display the remaining parameters of state,
authentication method and Web-based Access Control VLAN currently
set on the Switch.
Only Administrator-level users can issue this command.
357