D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 264

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
config authen_enable
default – The default method list for administration rights authentication,
Parameters
as defined by the user. The user may choose one or a combination of up
to four (4) of the following authentication methods:
method_list_name – Enter a previously implemented method list name
defined by the user (create authen_enable). The user may add one, or a
combination of up to four (4) of the following authentication methods to
this method list:
Only Administrator-level users can issue this command.
Restrictions
tacacs – Adding this parameter will require the user to be
authenticated using the TACACS protocol from the remote
TACACS server hosts of the TACACS server group list.
xtacacs – Adding this parameter will require the user to be
authenticated using the XTACACS protocol from the remote
XTACACS server hosts of the XTACACS server group list.
tacacs+ – Adding this parameter will require the user to be
authenticated using the TACACS+ protocol from the remote
TACACS+ server hosts of the TACACS+ server group list.
radius – Adding this parameter will require the user to be
authenticated using the RADIUS protocol from the remote
RADIUS server hosts of the RADIUS server group list.
server_group <string 15> - Adding this parameter will require
the user to be authenticated using a user-defined server group
previously configured on the Switch.
local_enable - Adding this parameter will require the user to be
authenticated using the local user account database on the
Switch.
none – Adding this parameter will require no authentication to
access the Switch.
tacacs – Adding this parameter will require the user to be
authenticated using the TACACS protocol from a remote
TACACS server.
xtacacs – Adding this parameter will require the user to be
authenticated using the XTACACS protocol from a remote
XTACACS server.
tacacs+ – Adding this parameter will require the user to be
authenticated using the TACACS+ protocol from a remote
TACACS+ server.
radius - Adding this parameter will require the user to be
authenticated using the RADIUS protocol from a remote
RADIUS server.
server_group <string 15> - Adding this parameter will require
the user to be authenticated using a user-defined server group
previously configured on the Switch.
local_enable - Adding this parameter will require the user to be
authenticated using the local user account database on the
Switch. The local enable password of the device can be
configured using the "config admin local_password"
command.
none – Adding this parameter will require no authentication to
access the administration level privileges on the Switch.
260