D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 418

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
enable/disable dhcp_server
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example:
To enable dhcp server.
show dhcp_server
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example:
To display the dhcp server settings.
DES-3800:admin#show dhcp pool engineering
Command: show dhcp pool engineering
Pool Name
Network Address
Domain Name
DNS Server
NetBIOS Name Server : 10.10.10.1
NetBIOS Node Type
Default Router
Pool Lease
Boot File
Next Server
DES-3800:admin#
This command enables or disables the DHCP server function.
enable dhcp_server
disable dhcp_server
This command is used to enable or disable the DHCP server function
on the Switch. If DHCP relay is enabled, DHCP server can not be
enabled. The opposite is also true.
None.
Only Administrator or Operator-level users can issue this command.
DES-3800:admin#enable dhcp_server
Command: enable dhcp_server
Success.
DES-3800:admin#
This command displays the status of DHCP server.
show dhcp server
This command will display the current DHCP server on the switch.
None.
None.
: engineering
: 10.10.10.0/24
: alpha.com
: 10.10.10.1
: broadcast
: 10.10.10.1
: 10 days, 0 hours, 0 minutes
: boot.bin
: 10.10.10.2
414