D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 131

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
Example usage:
To disable forwarding all multicast traffic to a multicast-enabled router:
DES-3800:admin#disable igmp_snooping forward_mcrouter_only
Command: disable igmp_snooping forward_mcrouter_only
Success.
DES-3800:admin#
show igmp_snooping
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show IGMP snooping:
Used to show the current status of IGMP snooping on the Switch.
show igmp_snooping {vlan <vlan_name 32>}
This command will display the current IGMP snooping configuration
on the Switch.
<vlan_name 32> − The name of the VLAN for which to view the IGMP
snooping configuration.
None.
DES-3800:admin#show igmp_snooping
Command: show igmp_snooping
IGMP Snooping Global State : Disabled
Multicast router Only
VLAN Name
Query Interval
Max Response Time
Robustness Value
Last Member Query Interval : 1
Host Timeout
Route Timeout
Leave Timer
Querier State
Querier Router Behavior
State
Fast Leave
VLAN Name
Query Interval
Max Response Time
Robustness Value
Last Member Query Interval : 1
Host Timeout
Route Timeout
Leave Timer
Querier State
Querier Router Behavior
State
Fast Leave
Total Entries: 2
DES-3800:admin#
: Disabled
: default
: 125
: 10
: 2
: 260
: 260
: 2
: Disabled
: Non-Querier
: Disabled
: Enabled
: vlan2
: 125
: 10
: 2
: 260
: 260
: 2
: Disabled
: Non-Querier
: Disabled
: Enabled
127