D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 284

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
Example usage:
To view SIM neighbors:
DES-3800:admin#show sim neighbor
Command: show sim neighbor
Neighbor Info Table
Port
------
23
23
24
Total Entries: 3
DES-3800:admin#
reconfig
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To connect to the MS, with member ID 2, through the CS, using the command line interface:
config sim_group
Purpose
Syntax
Description
Parameters
Restrictions
MAC Address
------------------
00-35-26-00-11-99
00-35-26-00-11-91
00-35-26-00-11-90
Used to connect to a member switch, through the commander
switch, using telnet.
reconfig [member_id <value 1-32 | exit]
This command is used to reconnect to a member switch using telnet.
member_id <value 1-32> - Select the ID number of the member
switch the user desires to configure.
exit – This command is used to exit from managing the member
switch and will return to managing the commander switch.
Only Administrator-level users can issue this command.
DES-3800:admin#reconfig
Command: reconfig
DES-3800:admin#
Login:
Used to add candidates and delete members from the SIM group.
config sim_group [add <candidate_id 1-100> {<password>} |
delete <member_id 1-32>]
This command is used to add candidates and delete members from
the SIM group by ID number.
add <candidate_id 1-100> <password> - Use this parameter to
change a candidate switch (CaS) to a member switch (MS) of a SIM
group. The CaS may be defined by its ID number and a password (if
necessary).
delete <member_id 1-32> - Use this parameter to delete a member
switch of a SIM group. The member switch should be defined by ID
number.
Only Administrator-level users can issue this command.
Role
---------
Commander
Member
Candidate
member_id 2
member_id 2
280