D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 401

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
DES-3800:admin# show pim register_checksum_include_data_rp_ list
Command: show pim register_checksum_include_data_rp_ list
RP Address
-------------------------------------------
11.1.1.1
Total Entries: 1
DES-3800:admin#
show pim active_rp
Purpose
Syntax
Description
Parameters
Restrictions
Usage example:
To show the currently active RPs that have been chosen from the RP Set table:
DES-3800:admin# show pim active_rp
Command: show pim active_rp
Group Address
-----------------
225.1.1.2
255.1.2.3
235.5.6.7
Total Entries: 3
DES-3800:admin#
Used to display currently active RPs that have been chosen form the RP
Set table.
show pim active_rp {group <multicast_ipaddr>}
This command will display currently active RPs that have been chosen
from the RP Set table, which are relaying multicast data.
group <multicast_ipaddr> - Enter the multicast group IP address used in
identifying the Rendezvous Point (RP). This address must be a class D
address.
None.
RP Address
----------------------
172.24.5.6
172.24.5.6
152.2.3.4
397