D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 116

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
enable gvrp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the generic VLAN Registration Protocol (GVRP):
DES-3800:admin#enable gvrp
Command: enable gvrp
Success.
DES-3800:admin#
disable gvrp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable the Generic VLAN Registration Protocol (GVRP):
DES-3800:admin#disable gvrp
Command: disable gvrp
Success.
DES-3800:admin#
show gvrp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
Used to enable GVRP on the Switch.
enable gvrp
This command, along with disable gvrp below, is used to enable and
disable GVRP on the Switch, without changing the GVRP configuration
on the Switch.
None.
Only Administrator or Operator-level users can issue this command.
Used to disable GVRP on the Switch.
disable gvrp
This command, along with enable gvrp, is used to enable and
disable GVRP on the Switch, without changing the GVRP
configuration on the Switch.
None.
Only Administrator or Operator-level users can issue this command.
Used to display the GVRP status for a port list on the Switch.
show gvrp {<portlist>}
This command displays the GVRP status for a port list on the Switch.
<portlist> − Specifies a port or range of ports for which the GVRP
status is to be displayed.
None.
112