D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 83

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
Example usage:
To configure a syslog host:
DES-3800:admin#config syslog host 1 severity all
facility local0
Command: config syslog host all severity all facility
local0
Success.
DES-3800:admin#
Example usage:
To configure a syslog host for all hosts:
DES-3800:admin#config syslog host all severity all
facility local0
Command: config syslog host all severity all facility
local0
Success.
DES-3800:admin#
delete syslog host
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete a previously configured syslog host:
DES-3800:admin#delete syslog host 4
Command: delete syslog host 4
Success.
DES-3800:admin#
Used to remove a syslog host, that has been previously configured, from the
Switch.
delete syslog host [<index 1-4> | all]
The delete syslog host command is used to remove a syslog host that has
been previously configured from the Switch.
<index 1-4> − Specifies that the command will be applied to an index of hosts.
There are four available indexes, numbered 1 through 4.
all − Specifies that the command will be applied to all hosts.
Only Administrator or Operator-level users can issue this command.
79