D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 295

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
delete stp instance_id
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete stp instance ID 2 from the Switch.
config stp priority
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To set the priority value for instance_id 2 as 4096:
Success.
DES-3800:admin#
Used to delete a STP instance ID from the Switch.
delete stp instance_id <value 1-4>
This command allows the user to delete a previously configured STP
instance ID from the Switch.
<value 1-4> - Enter a value between 1 and 4 to identify the Spanning
Tree instance on the Switch.
Only Administrator or Operator-level users can issue this command.
DES-3800:admin#delete stp instance_id 2
Command: delete stp instance_id 2
Success.
DES-3800:admin#
Used to update the STP instance configuration.
config stp priority <value 0-61440> instance_id <value 0-4>
This command is used to update the STP instance configuration
settings on the Switch. The MSTP will utilize the priority in selecting the
root bridge, root port and designated port. Assigning higher priorities to
STP regions will instruct the Switch to give precedence to the selected
instance_id for forwarding packets. The lower the priority value set, the
higher the priority.
priority <value 0-61440> - Select a value between 0 and 61440 to
specify the priority for a specified instance id for forwarding packets.
The lower the value, the higher the priority. This entry must be divisible
by 4096.
instance_id <value 0-4> - Enter the value corresponding to the
previously configured instance id for which to set the priority value. An
instance id of 0 denotes the default instance_id (CIST) internally set on
the Switch.
Only Administrator or Operator-level users can issue this command.
DES-3800:admin#config stp priority 4096
instance_id 2
Command : config stp priority 4096 instance_id 2
Success.
291