D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 171

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
To display the parameters for a specific command:
DES-3800:admin#? config stp
Command:? config stp
Command: config stp
Usage: {maxage <value 6-40> | maxhops <value1-20> | hellotime
<value 1-10> | forwarddelay <value 4-30> | txholdcount <value
1-10> | fbpdu [enable | disable] | lbd [enable | disable] |
lbd_recover_timer [0 | <value 60-1000000>]}
Description: Used to update the STP Global Configuration.
config stp instance_id
config stp mst_config_id
config stp mst_ports
config stp ports
config stp priority
config stp version
DES-3800:admin#
dir
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display all commands:
Used to display all commands in the Command Line Interface (CLI).
dir
This command will display all of the commands available through the
Command Line Interface (CLI).
None.
None.
DES-3800:admin#dir
..
?
clear
clear arptable
clear counters
clear fdb
clear log
clear port_security_entry port
config 802.1p default_priority
config 802.1p user_priority
config 802.1x auth_mode
config 802.1x auth_parameter ports
config 802.1x capability ports
config 802.1x guest_vlan
config 802.1x guest_vlan ports
config 802.1x init
config 802.1x reauth
config access_profile profile_id
config account
config address_binding ip_mac ipaddress
config address_binding ip_mac ports
config admin local_enable
CTRL+C ESC q Quit SPACE n Next Page ENTER Next
Entry a All
167