D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 346

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
show cpu_interface_filtering
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show the CPU filtering state on the Switch:
show cpu_access_profile
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show the CPU filtering state on the Switch:
Used to view the current running state of the CPU filtering mechanism on
the Switch.
show cpu_interface_filtering
The show cpu_interface_filtering state command is used view the current
running state of the CPU interface filtering mechanism on the Switch.
None.
Only Administrator or Operator-level users can issue this command.
DES-3800:admin#show cpu_interface_filtering
Command: show cpu_interface_filtering
CPU Interface Filtering : Enabled
DES-3800:admin#
Used to view the CPU access profile entry currently set in the Switch.
show cpu access_profile {profile_id <value 1-5> {access_id <value 1-
65535>}}
The show cpu_access_profile command is used view the current CPU
interface filtering entries set on the Switch.
profile_id <value 1-5> − Enter an integer between 1 and 5 that is used to
identify the CPU access profile to be viewed with this command. This value
is assigned to the access profile when it is created with the create cpu
access_profile command.
access_id <value 1-65535> - Enter an integer between 1 and 65535 that is
used to identify the CPU access profile rule to be viewed with this
command. This value is assigned to the access profile rule when it is
created with the config cpu access_profile profile_id command.
Only Administrator or Operator-level users can issue this command.
342