D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 328

Xstack des-3800 series layer 3 stackable fast ethernet managed switch
Hide thumbs Also See for DES-3852 - xStack Switch - Stackable:
Table of Contents

Advertisement

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
config address_binding ip_mac ipaddress
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure address binding on the Switch:
DES-3800:admin#config address_binding ip_mac ipaddress
10.1.1.3 mac_address 00-00-00-00-00-05
Command: config address_binding ip_mac ipaddress 10.1.1.3
mac_address 00-00-00-00-00-05
Success.
DES-3800:admin#
To configure address binding on the Switch for ACL mode:
DES-3800:admin#config address_binding ip_mac ipaddress
10.1.1.3 mac_address 00-00-00-00-00-05 mode acl
Command: config address_binding ip_mac ipaddress 10.1.1.3
mac_address 00-00-00-00-00-05 mode acl
Success.
DES-3800:admin#
Used to configure an IP-MAC Binding entry.
config address_binding ip_mac ipaddress <ipaddr> mac_address
<macaddr> {ports [<portlist> | all] | mode {arp | acl]}
This command will configure an IP-MAC Binding entry.
<ipaddr> - The IP address of the device where the IP-MAC binding is
made.
<macaddr> - The MAC address of the device where the IP-MAC binding
is made.
<portlist> - Specifies a port or range of ports to be configured for address
binding.
all – Specifies that all ports on the switch will be configured for address
binding.
mode – The user may set the mode for this IP-MAC binding settings by
choosing one of the following:
arp - Choosing this selection will set a normal IP-MAC Binding
entry for the IP address and MAC address entered. If the
system is in ARP mode, the arp mode entries and acl mode
entries will be effective. If the system is in the acl mode, only
the acl mode entries will be active.
acl - Choosing this entry will allow only packets from the source
IP-MAC binding entry created here. All other packets with a
different IP address will be discarded by the Switch. This mode
can only be used if the ACL Mode has been enabled in the IP-
MAC Binding Ports window as seen previously.
Only Administrator or Operator-level users can issue this command.
324

Advertisement

Table of Contents
loading

This manual is also suitable for:

Des-3828Des-3828pDes-3828dc

Table of Contents