D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 40

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
Securiy Level
Group Name
ReadView Name
create snmp view
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create a new snmp view called dlinkview:
DES-3800:admin# create snmp view dlinkview 1.3.6 view_type included
Command: create snmp view dlinkview 1.3.6 view_type included
Success.
DES-3800:admin#
: NoAuthNoPriv
: WriteGroup
: CommunityView
Used to assign views to community strings to limit which MIB
objects an SNMP manager can access.
create snmp view <view_name 32> <oid> view_type [included |
excluded]
The create snmp view assigns views to community strings to limit
which MIB objects the SNMP manager can access.
view_name- View name to be created.
oid- Object- Identified tree, MIB tree
view_type- Specifies the access type of the MIB tree in this view.
The view_type options are as follows:
included- Include this object in the view.
excluded- Exclude this object in the view.
Only Administrator or Operator-level users can issue this command.
36