D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 360

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
create wac user
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create a WAC user on the Switch.
DES-3800:admin#create wac user Darren vlan Trinity
Command: create wac user Darren vlan Trinity
Success.
DES-3800:admin#
config wac user
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure a WAC user on the Switch.
DES-3800:admin#config wac user Peter vlan Trinity
Command: config wac user Peter vlan Trinity
Success.
DES-3800:admin#
Used to create a Web-based Access Control user on the switch
create wac user <username 15> {vlan <vlan_name 32>}
This command is used to create a Web-based Access Control user on
the Switch.
<username 15> - Enter a username of up to 15 alphanumeric
characters used to authenticate users trying to access the network via
the Switch. This username must be identical to the one the user enters
to access the Web-based Access Control for the Switch.
vlan <vlan_name 32> - Enter the VLAN name of the VLAN this user will
be placed in, once authenticated.
Only Administrator-level users can issue this command.
Used to configure a previously created Web-based Access Control user
on the Switch.
config wac user <username 15> vlan <vlan_name 32>
This command is used to configure a previously created Web-based
Access Control user on the Switch.
<username 15> - Enter a username of up to 15 alphanumeric
characters used to authenticate users trying to access the network via
the Switch. This username must be identical to the one the user enters
to access the Web-based Access Control for the Switch.
vlan <vlan_name 32> - Enter the VLAN name of the VLAN this user will
be placed in, once authenticated, if a change in VLANs is desired.
Only Administrator-level users can issue this command.
356