D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 389

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
config pim register_probe_time
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the register probe time:
config pim register_suppression_time
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the register suppression time:
Used to set a time to send a probe message from the DR to the RP before
the Register Suppression time expires.
config pim register_probe_time <value 1-127>
This command is used to set a time to send a probe message from the DR
to the RP before the Register Suppression time expires. If a Register Stop
message is received by the DR, the Register Suppression Time will be
restarted. If no Register Stop message is received within the probe time,
Register Packets will be resent to the RP. This command is for PIM-SM
configurations only.
<value 1-127> - Configure this field to set a time to send a probe message
from the DR to the RP before the Register Suppression time expires. The
user may configure a time between 1-127 seconds with a default setting of
5 seconds.
Only Administrator or Operator-level users can issue this command.
DES-3800:admin#config pim register_probe_time 5
Command: config pim register_probe_time 5
Success.
DES-3800:admin#
Used to configure the interval between the sending of register packets for
the PIM protocol.
config pim register_suppression_time <value 3-255>
This command is to be configured for the first hop router from the source.
After this router sends out a register message to the RP, and the RP replies
with a register stop message, it will wait for the time configured here to send
out another register message to the RP. This command is for PIM-SM
configurations only.
<value 3-255> - The user may set an interval time between 3-255 with a
default setting of 60 seconds for the sending of register suppression time
packets. The default value is 60 seconds.
Only Administrator or Operator-level users can issue this command.
DES-3800:admin#config pim register_suppression_time 15
Command: config pim register_suppression time_15
Success.
DES-3800:admin#
385